SkillSoft - Catalog

Home > Catalog > Catalog - Detail

Cisco IP Telephony Part 1 (CIPT1) 5.0 (Linux Platform) Expert Encore

Overview/Description
Target Audience
Prerequisites
Expected Duration
Lesson Objectives
Course Number

Overview/Description
The Implementing Cisco Unified CallManager Part 1 (CIPT1) 5.0 course introduces learners to Cisco’s Unified CallManager (UCM) application, Release 5.0. UCM 5.0 acts as the call routing and signaling component for Cisco’s IP telephony solution. This course discusses a variety of UCM configuration scenarios, including: performing postinstallation tasks, configuring gateways/ gatekeepers, and preparing switches to connect to IP phones. A major topic addressed in CIPT1 focuses on the construction of route plans to place intracluster and intercluster calls. Learners will also learn to configure telephony class of service (calling restrictions) and numerous user telephone features, services, media resources, and applications.

Target Audience
This course is recommended for any student interested in mastering IP telephony technology and Cisco's UCM application.

Prerequisites
To benefit fully from this course, students should have the following prerequisite courses/skills and knowledge:

Working knowledge of fundamental terms and concepts of computer networking, to include LANs, WANs, and IP switching and routing
Ability to configure and operate Cisco routers and switches and to enable VLANs and DHCP
Ability to configure voice interfaces on Cisco voice-enabled equipment for connection to traditional, nonpacketized telephony equipment, and to configure the call flows for POTS and VoIP dial peers
Basic internetworking skills taught in the Interconnecting Cisco Network Devices (ICND) course, or its equivalent
Knowledge of traditional public switched telephone network (PSTN) operations and voice fundamentals
VoIP concepts taught in the Cisco Voice over IP (CVOICE) course, or its equivalent

Certification
CCVP

Exams
EOL

Included Labs

Configuring Cisco Unified CallManager Basic Settings
Configuring Cisco Unified CallManager to Support Cisco IP Phones
Configuring an MGCP Voice Gateway
Configuring an H.323 gateway in the Cisco Unified CallManager
Configuring Basic Dial Plan Elementsc
Configuring Hunt Groups and Call Coverage
Implementing Calling Privileges and Restrictions
Configuring Media Resources
Configuring MOH
Configuring Cisco Unified CallManager Extension Mobility

Skills
This course provides instruction in the use of the following hardware/operating system technologies:

Catalyst 2950 Switches
Catalyst 3550 Switches
2800/3800 Series Voice-enabled Routers
Unified CallManager Platform (Cisco-modified version of Red Hat Linux)
Unified CallManager Release 5.0

Outline
Implementing Cisco Unified CallManager Part 1 (CIPT1) 5.0

Module 1: Get Started with Cisco Unified CallManager

Lesson 1: Introducing Cisco Unified CallManager Release 5.0
Lesson 2: Evaluating Cisco Unified CallManager Release 5.0 Deployment Options
Lesson 3: Installing Cisco Unified CallManager Release 5.0
Summary

Module 2: Administration of Cisco Unified CallManager Release 5.0

Lesson 1: Administering the Cisco IP Telephony Platform
Lesson 2: Performing General Administration
Lesson 3: Configuring Cisco Unified CallManager Release 5.0 Basic Settings
Lesson 4: Implementing Disaster Recovery
Summary

Module 3: Deployment of Cisco Unified CallManager Release 5.0 Endpoints

Lesson 1: Configuring Cisco Catalyst Switches
Lesson 2: Evaluating Cisco IP Telephony Endpoints
Lesson 3: Configuring Cisco Unified CallManager to Support IP Phones
Lesson 4: Configuring SIP Endpoints
Lesson 5: Managing Endpoints with Cisco Unified CallManager BAT
Summary

Module 4: Deployment of a Dial Plan on Cisco Unified CallManager Release 5.0

Lesson 1: Understanding Dial Plans
Lesson 2: Configuring Cisco Unified CallManager Trunks
Lesson 3: Configuring Voice Gateways
Lesson 4: Configuring Basic Dial Plan Elements
Lesson 5: Configuring Hunt Groups and Call Coverage
Lesson 6: Configuring Complex Dial Plan Elements
Lesson 7: Implementing Calling Privileges and Restrictions
Summary

Module 5: Implementation of Multiple Site Deployment

Lesson 1: Understanding Call Admission Control in Cisco Unified CallManager Release 5.0
Lesson 2: Configuring Call Admission Control in Cisco Unified CallManager Release 5.0
Lesson 3: Configuring Cisco Unified SRST
Summary

Module 6: Cisco Unified CallManager Features and Services

Lesson 1: Configuring Media Resources
Lesson 2: Configuring User Features-Part 1
Lesson 3: Configuring User Features-Part 2
Lesson 4: Configuring Cisco Unified CallManager Attendant Console
Summary
Configuring Cisco Unified CallManager Basic Settings
Configuring Cisco Unified CallManager to Support Cisco IP Phones
Configuring an MGCP Voice Gateway
Configuring an H.323 gateway in the Cisco Unified CallManager
Configuring Basic Dial Plan Elementsc
Configuring Hunt Groups and Call Coverage
Implementing Calling Privileges and Restrictions
Configuring Media Resources
Configuring MOH
Configuring Cisco Unified CallManager Extension Mobility

Expected Duration (hours)
30.0

Lesson Objectives

Cisco IP Telephony Part 1 (CIPT1) 5.0 (Linux Platform) Expert Encore

Deploy a Cisco Unified CallManager Release 5.0 server in a cluster using a supported IP telephony deployment model

Perform platform and general administration, and implement disaster recovery

Deploy SCCP and SIP endpoints in a Cisco Unified CallManager Release 5.0 cluster

Deploy a dial plan consisting of gateways, trunks, route plan elements, hunt groups, partitions, and calling search spaces

Implement multiple site deployments with fallback telephony services in the remote branches, call admission control over the WAN bandwidth, and automated call rerouting through the PSTN when the WAN bandwidth is insufficient

Configure Cisco Unified CallManager to enable end-user features and services

Course Number:
LLCS0022