Analog Circuit Design: A Tutorial Guide to Applications and Solutions
- 18h 10m
- Bob Dobkin, Jim Williams (eds)
- Elsevier Science and Technology Books, Inc.
- 2011
Analog circuit and system design today is more essential than ever before. With the growth of digital systems, wireless communications, complex industrial and automotive systems, designers are challenged to develop sophisticated analog solutions. This comprehensive source book of circuit design solutions will aid systems designers with elegant and practical design techniques that focus on common circuit design challenges. The book's in-depth application examples provide insight into circuit design and application solutions that you can apply in today's demanding designs.
- Covers the fundamentals of linear/analog circuit and system design to guide engineers with their design challenges.
- Based on the Application Notes of Linear Technology, the foremost designer of high performance analog products, readers will gain practical insights into design techniques and practice.
- Broad range of topics, including power management tutorials, switching regulator design, linear regulator design, data conversion, signal conditioning, and high frequency/RF design.
- Contributors include the leading lights in analog design, Robert Dobkin, Jim Williams and Carl Nelson, among others.
In this Book
-
Publisher's Note
-
Introduction
-
Foreword
-
Power Management Tutorials
-
Ceramic Input Capacitors can cause Overvoltage Transients
-
Minimizing Switching Regulator Residue in Linear Regulator Outputs
-
Power Conditioning for Notebook and Palmtop Systems
-
2-Wire Virtual Remote Sensing for Voltage Regulators
-
Switching Regulator Design
-
LT1070 Design Manual
-
Switching Regulators for Poets
-
Step-Down Switching Regulators
-
A Monolithic Switching Regulator with 100μV Output Noise
-
Powering Complex FPGA-Based Systems Using Highly Integrated DC/DC μModule Regulator Systems
-
Powering Complex FPGA-Based Systems Using Highly Integrated DC/DC µModule Regulator Systems
-
Diode Turn-on Time Induced Failures in Switching Regulators
-
Linear Regulator Design
-
Performance Verification of Low Noise, Low Dropout Regulators
-
High Voltage and High Current Applications
-
Parasitic Capacitance Effects in Step-up Transformer Design
-
High Efficiency, High Density, PolyPhase Converters for High Current Applications
-
Powering Lasers and Illumination Devices
-
Ultracompact LCD Backlight Inverters
-
A Thermoelectric Cooler Temperature Controller for Fiber Optic Lasers
-
Current Sources for Fiber Optic Lasers
-
Bias Voltage and Current Sense Circuits for Avalanche Photodiodes
-
Automotive and Industrial Power Design
-
Developments in Battery Stack Voltage Measurement
-
Data Conversion
-
Some Techniques for Direct Digitization of Transducer Outputs
-
The Care and Feeding of High Performance ADCs—Get All the Bits You Paid for
-
A Standards Lab Grade 20-Bit DAC with 0.1ppm/°C Drift
-
Delta Sigma ADC Bridge Measurement Techniques
-
1ppm Settling Time Measurement for a Monolithic 18-Bit DAC
-
Signal Conditioning
-
Applications for a Switched-Capacitor Instrumentation Building Block
-
Application Considerations and Circuits for a New Chopper-Stabilized Op Amp
-
Designing Linear Circuits for 5V Single Supply Operation
-
Application Considerations for an Instrumentation Lowpass Filter
-
Micropower Circuits for Signal Conditioning
-
Thermocouple Measurement
-
Take the Mystery Out of the Switched-Capacitor Filter
-
Bridge Circuits
-
High Speed Amplifier Techniques
-
A Seven-Nanosecond Comparator for Single Supply Operation
-
Understanding and Applying Voltage References
-
Instrumentation Applications for a Monolithic Oscillator
-
Slew Rate Verification for Wideband Amplifiers
-
Instrumentation Circuitry Using RMS-to-DC Converters
-
775 Nanovolt Noise Measurement for a Low Noise Voltage Reference
-
High Frequency/RF Design
-
LT5528 WCDMA ACPR, AltCPR and Noise Measurements
-
Measuring Phase and Delay Errors Accurately in I/Q Modulators
SHOW MORE
FREE ACCESS
