Course Details

Previous Page

Implementing Cisco IP Routing (ROUTE) 2.0 Expert Live with Encore

Target Audience
Expected Duration
Lesson Objectives
Course Number

This is an advanced course on Cisco routing configuration. Upon completion of this course students will be able to configure and optimize a routing domain using OSPF, EIGRP, BGP, PBR, IP SLA and configure redistribution when needed. This course covers routing for both IPv4 and IPv6.

Live training will focus on content within Modules 2-6. Students are expected to complete modules 1 and 7, and Module 6 lessons 1 through 3 by using the recorded training format. These recorded-only training sections can be reviewed within the Encore format’s thorough coverage or your Live Session Homework (Live Session + Live Session Homework or Encore required for completion). This allows the Live sessions to focus on the most challenging and critical material.
Students attending this course should have a solid foundation in routing fundamentals, Cisco IOS basics, and Cisco routing basics. Attending the ICND1 and ICND2 classes or having the CCNA certification will fulfill these expectations.
This course offers the official training for the 2.0 Implementing Cisco IP Routing certification exam, which is a component exam for the CCNP routing and switching certification. Passing this exam will also refresh the CCNA certification, which expires after three years.
300-101 ROUTE 2.0
Included Labs
Documenting your Topology
Configuring EIGRP on R1 R2 R3
Configuring EIGRP on R4 R5 R6
Troubleshooting EIGRP Adj.
Troubleshooting EIGRP Adj. Part 2
Troubleshooting EIGRP Routes: Part 1
Troubleshooting EIGRP Routes: Part 2
Configuring EIGRP Passive interfaces
Configuring EIGRP Route Summarization
Configuring EIGRP Unicast Neighborships
Configuring EIGRP Authentication
Configuring a Static Default Route with EIGRP
Using ISPA as the Primary Path with EIGRP
Implementing the EIGRP Stub Feature
Troubleshooting EIGRP Stub Routers
Load Balancing with EIGRP
Using Leak Maps with EIGRP
Filtering EIGRP Routes with Distribute Lists
EIGRP Convergence Timers
Implementing Policy Based Routing Part 1
Implementing Policy Based Routing Part 2
Implement OSPFv2 Part 1
Implementing OSPFv2 Part2
Implementing OSPFv2 Part 3
Advertising a Default Route
Configuring OSPF Passive Interfaces
Setting the OSPF Reference Bandwidth
Configure OSPF Authentication
Redistributing Connected Networks Into OSPF
Suppressing Type 5 LSAs in Area 123
Suppressing Type 5 and 3 LSAs in Area 123
Suppressing type 5 LSAs in area 4567
Suppressing Type 5 and 3 LSAs in area 4567
Filtering OSPF v2 Routes with Distribute Lists
Filtering Type 3 LSAs with Filter Lists
Modifying the Cost of an OSPF Interface
Configuring OSPF Inter-Area Route Summarization
Configuring OSPF External Route Summarization
Modifying the Metric of an OSPF External Route
Modifying the OSPF Metric Type
The OSPF Path Selection Process
OSPF Virtual Links
Troubleshooting OSPF: Part 5
Troubleshooting OSPF: Part 1
Troubleshooting OSPF: Part 2
Troubleshooting OSPF: Part 3
Troubleshooting OSPF: Part 4
Troubleshooting OSPF: Part 6
Redistribution Part 1: EIGRP to OSPF on R5
Redistribution Part 2: EIGRP to OSPF on R6
Redistribution Part 3: EIGRP to OSPF on R6
Redistribution Part 4: OSPF To EIGRP on R5
Redistribution Part 5: OSPF to EIGRP on R6
Redistribution Issues Part 1
Redistribution Issues Part 2
Redistribution Issues Part 3
Configuring EBGP on R3 and R4 to ISPs
Configuring EBGP on R4, R5, and R6
Configuring IBGP Peerings in AS 64501
Configuring IBGP Peerings in AS 64500
Solving Next Hop IP Issues in AS 64501: Part 1
Solving Next Hop IP Issues in AS 64501: Part 2
Troubleshooting BGP Issues in AS 64500 Part 1
Troubleshooting BGP Issues in AS 64500 Part 2
Advertising Networks with BGP: Part1
Advertising Networks with BGP: Part2
Advertising Summary Networks with BGP: Part 1
Advertising Summary Networks with BGP: Part 2
Redistribution Networks into BGP
Manipulating BGP Path Selection: Weight
Manipulating BGP Path Selection: Local Preference
Manipulating BGP Path Selection: MED
Manipulating BGP Path Selection: AS Path
Configuring EIGRP for IPv6 on R1 and R2
Conifguring EIGRP for IPv6 Passive Interfaces
Configure EIGRP for Ipv6 on R3
Implementing the EIGRP for IPv6 Stub feature
Configuring OSPFv3 in Area 0
Configuring OSPFv3 in Area 567
Redistributing from OSPFv3 into EIGRP for IPv6
Redistributing from EIGRP for IPv6 into OSPFv3
OSPFv3 Stub Area
OSPFv3 Totally Stubby Area
Configuring the DMVPN Hub
Configuring the DMVPN Spokes
Using EIGRP over a DMVPN
Solving Reachability Issues over DMVPNs
Configuring Spoke to Spoke DMVPNs
This course provides instruction in the following:
Configuration of EIGRP routing in a large network for IPv4 and IPv6
Configuration of OSPF and OSPFv3 routing in a large network
Configuration of redistribution between multiple routing protocols
Configuration of policy based routing
Integration with an ISP using BGP
Securing a routing domain
Implementing Cisco IP Routing 2.0
Module 1: Basic Network and Routing Concepts
Lesson 1: Differentiating Routing Protocols
Lesson 2: Understanding Network Technologies
Lesson 3: Connecting Remote Locations with the Headquarters
Lesson 4: Implementing RIPng
Module 2: EIGRP Implementation
Lesson 1: Establishing EIGRP Neighbor Relationships
Lesson 2: Building the EIGRP Topology Table
Lesson 3: Optimizing EIGRP Behavior
Lesson 4: Configuring EIGRP for IPv6
Lesson 5: Discovering Named EIGRP Configuration
Module 3: OSPF Implementation
Lesson 1: Establishing OSPF Neighbor Relationship
Lesson 2: Building the Link State Database
Lesson 3: Optimizing OSPF Behavior
Lesson 4: Configuring OSPFv3
Module 4: Configuration of Redistribution
Lesson 1: Implementing Basic Routing Protocol Redistribution
Lesson 2: Manipulating Redistribution Using Route Filtering
Module 5: Path Control Implementation
Lesson 1: Implementing Path Control
Module 6: Enterprise Internet Connectivity
Lesson 1: Planning Enterprise Internet Connectivity
Lesson 2: Establishing Single-Homed IPv4 Internet Connectivity
Lesson 3: Establishing Single-Homed IPv6 Internet Connectivity
Lesson 4: Improving Resilience of Internet Connectivity
Lesson 5: Considering Advantages of Using BGP
Lesson 6: Implementing Basic BGP Operations
Lesson 7: Using BGP Attributes and Path Selection Process
Lesson 8: Controlling BGP Routing Updates
Lesson 9: Implementing BGP for IPv6 Internet Connectivity
Module 7: Routers and Routing Protocol Hardening
Lesson 1: Describing Routing Protocol Authentication Options
Lesson 2: Configuring EIGRP Authentication
Lesson 3: Configuring OSPF Authentication
Lesson 4: Configuring BGP Authentication

Target Audience
This course is intended for students who are looking for real-world routing knowledge, and those that are considering CCNP and CCIP certification. This course’s discussion of routing could also benefit early CCIE Routing and Switching candidates.

Expected Duration (hours)

Lesson Objectives

Implementing Cisco IP Routing (ROUTE) 2.0 Expert Live with Encore

  • Basic Network and Routing Concepts
  • EIGRP Implementation
  • OSPF Implementation
  • Configuration of Redistribution
  • Path Control Implementation
  • Enterprise Internet Connectivity
  • Routers and Routing Protocol Hardening
  • Course Number: